C100 / C100MT / C100L / C100LMT / C150 / C150MT / C150L – Simulated Lead Flashings

The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc. Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim. Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in. A smooth finish can be obtained by wiping the sealant with a moistened finger.

Trim name:
C100

Dimensions:
Vertical cover: 100mm; Wall penetration: 35mm

Application:
Replaces traditional lead flashing.
Dark grey, non-adhesive finish to simulate the appearance of lead.
Do not topcoat.

Trim name:
C100MT with Moisture Trap

Dimensions:
Vertical cover: 100mm; Wall penetration: 35mm

Application:
As C100 with integral self-securing moisture trap.

Trim name:
C100L Long Leg

Dimensions:
Vertical cover: 100mm; Wall penetration: 50mm

Application:
As C100 with deep wall penetration.

Trim name:
C100LMT Long with Moisture Trap

Dimensions:
Vertical cover: 100mm; Wall penetration: 50mm

Application:
As C100 with deep wall penetration and integral self-securing moisture trap.

Trim name:
C150

Dimensions:
Vertical cover: 150mm; Wall penetration: 35mm

Application:
Replaces traditional lead flashing.
Dark grey, non-adhesive finish to simulate the appearance of lead.
Do not topcoat.

Trim name:
C150MT with Moisture Trap

Dimensions:
Vertical cover: 150mm; Wall penetration: 35mm

Application:
As C150 with integral self-securing moisture trap.

Trim name:
C150L Long Leg

Dimensions:
Vertical cover: 150mm; Wall penetration: 50mm

Application:
As C150 with deep wall penetration.