A single batten is fixed level with the top edge of the deck. Apply 30mm beads of trim adhesive to the batten every 300mm, rub the trim into place and nail through the top of the trim into the decking. Do not nail through the front of the trim. If a ladder is likely to be leant against a B type trim for regular access to the roof, the trim will need to be reinforced to avoid deformation. The trim can either be doubled up by slotting a section of extra trim within the section where the ladder will be used or it can be reinforced with an extra layer of GRP laminate and then tissue to maintain a smooth finish. Alternatively, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid.
Trim name:
B230
Dimensions:
Girth: 230mm; Depth: 105mm
Application:
Flat roof edge detail to prevent water run off.
Drip matches A170.
Price €21.00 (inc Vat)
Please send us a message below with your telephone number.
Shipping agents & couriers insist on a contact number.
Trim name:
B260
Dimensions:
Girth: 260mm; Depth: 125mm
Application:
Flat roof edge detail to prevent water run off.
Compatible with C1, C2 and C4 corner trims.
Please send us a message below with your telephone number. Shipping agents & couriers insist on a contact number.
Trim name:
B300
Dimensions:
Girth: 300mm; Depth: 180mm
Application:
Deep fascia raised edge trim.
Usually used with a warm roof configuration.
Drip matches with A250 trim.
Please send us a message below with your telephone number. Shipping agents & couriers insist on a contact number.
